Get some small heat shrink and put it onOriginally Posted by DX grunt
Get some small heat shrink and put it on
DX grunt (28th July 2014)
Picked it up from the mechanic and got my old transfer so I can check it out and see if I can work out what the issue was with it also so I have a spare incase I want reduction gears in the future but I'm thinking I'd rather do the diff ratios
So your coming sunday then?
I'll be working on the car dent pulling, fitting sliders and welding on brush bars ..... Hopefully get most of it done
I'd love to but not ready ATM
Fitted new rubber bumpers on my tjm bullbar. I am surprised how flimsy the mounting system is and how easy it is to overtension the screw and damage the rubber. I also bought this compressor - 25% off at repco - I deflated my spare completely and inflated it to 50psi in about 2 minutes. I will do a more comprehensive inflation test later
Had the apprentice check the tyres! ImageUploadedByMotorculture1406465081.941378.jpg
mudnut (28th July 2014)
Only got it to primer stage so not as far as I hoped but it's still moving forward
Fitted some USB power outlets to all passenger doors.
2014-08-16 12.00.29.jpg
2014-08-16 11.59.52.jpg2014-08-16 12.00.47.jpg
6.5 Chevy, roof rack, uhf, Spotties, dual batteries, ARB Bullbar, 12, 000lb winch, (unfortunately not Warn) Safari snorkel, Dieselgas conversion, 2in lift, engine watchdog fitted, boost/EGT guages, front elokka fitted, rear power supply mods, turbo timer, dual wheel carrier rear bar.
Brilliant idea
Now to add to that ever growing to do list.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
I know what you mean Jay, I'm already looking for the next project and I only just finished this one.
6.5 Chevy, roof rack, uhf, Spotties, dual batteries, ARB Bullbar, 12, 000lb winch, (unfortunately not Warn) Safari snorkel, Dieselgas conversion, 2in lift, engine watchdog fitted, boost/EGT guages, front elokka fitted, rear power supply mods, turbo timer, dual wheel carrier rear bar.
Reply With Quote
