Hey guys.
When I turn the engine off it does not shut down straight away, it runs for about 1-2 seconds then splutters and stops. It's on my zd30 Di. Any ideas what it could be?
Hey guys.
When I turn the engine off it does not shut down straight away, it runs for about 1-2 seconds then splutters and stops. It's on my zd30 Di. Any ideas what it could be?
Bump......
I know from experience that this is caused by the fuel shut off solenoid valve sticking..
But unsure if this would be the same with the 3ltrs
Cheers
Kallen Westbrook
whens the last time you removed and cleaned the throttle body? could be gummed up with gunk
oddkid82 (28th May 2014)
I haven't done that yet. Is much involved to take it off and clean it?Originally Posted by Rickie3
Witty (8th October 2014)
No not really, just take the IC off, a couple vacuum hoses and 3 12mm bolts that hold the throttle body onto the inlet manifold, I recommend replacing the gasket between the manifold and throttle body, I cleaned my throttle body with degreaser and a bottle brush, wear gloves as it can be a very messy job
oddkid82 (28th May 2014)
My 2006 42TD does that on occasion now i know why
Nearly at 25 mate
Mine has done it only once before. Cos of turbo timer, I leave the car sometimes before engine stops. Like going to shops, and came out after about 10 mins and the car still running with the keys in my hand.
Sorry Matt, wasn't meant to quote you, by the way he made 25. Lol
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Teehee!...
Posting Permissions
Reply With Quote