Originally Posted by ova50
Volt gauge. Got it off ebay: http://www.ebay.com.au/itm/371056364...84.m1423.l2649
Available in Red Green & Blue. (check the measurements on their page, does a couple of different sizes)
Cut out Measurements: Length 30mm x Width 21mm
Actual size: Length 34mm x Width 24 mm x Depth 17.5mm
(edit: The conduit is the split type, from a Jaycar Store.)
I already ordered the voltmeter before your post and it turned up today, it's slightly bigger than your one (cutout is 45mm x 25mm), so I can't use the blanking plate and I had to file the hole slightly larger, I was hoping to mount my on-off-on rocker switch there, but not enough room and I have a small gap underneath the gauge that I need to fill. Display is bright blue and uses three wires. Thanks for the idea mate....
Reply With Quote