4.2 petrol fuel injected

[MADAZZ]

I have recently had to pull out my pistons to hone out bore replace rings and bigend shells but I cant find tourqe settings for the bigend and only the pistons have been removed engine is still in the car. I have found some setting on the forum but they are for the carby model is the bottom end the same as fuel inj model

[kevin07]

IMG_5859.JPGIMG_5860.JPG

I have recently had to pull out my pistons to hone out bore replace rings and bigend shells but I cant find tourqe settings for the bigend and only the pistons have been removed engine is still in the car. I have found some setting on the forum but they are for the carby model is the bottom end the same as fuel inj model

from the gregorys 1988-1997 petrol engines hope that can help