i used a little $20 piranah steamer on my tint. had to keep filling the steamer all the time but it took the complete tint off in 1 go. steamer & razor blade.
Used to just use razor blades when spraypainting to get overspray and glues off glass. Razor blades and windex should be all you need
'92 (MIGHTY) GQ ST 3.0L Duel Petrol / LPG, 2" Pedders Suspension Lift on 33x12.5x15 BigHorns
Lukey 2.5" Performance Exhaust with Extractors, snorkel
Auto Lokka In The Front, Duel Batteries, Stiff Deep Dish Steering Wheel,
how do you guys get the tint off of the glass with the defrosting wires in it? (rears) these 2 are my biggest worries
Cheers
Kallen Westbrook
No sweat. They covered that.. more heat and a good solvent.. I can see mine being an all day job.. 22 years old and bubbled as..Originally Posted by Westy's Accessories
and helpers?
Kallen Westbrook
Owner of
Westy's Accessories
Last edited by BigRAWesty; 6th May 2013 at 06:06 PM.
Cheers
Kallen Westbrook
Can't believe no one has said WD40 to remove the leftover sticky crap. Same as euco oil. Its the oil in it that does the work.
I tapped that app...
BigRAWesty (7th May 2013)
Cool. Thanks mudski.. ill give it a crack..
Kallen Westbrook
Owner of
Westy's Accessories
Last edited by BigRAWesty; 7th May 2013 at 11:22 PM.
Cheers
Kallen Westbrook
Stanley blades
Sent from my GT-I9305T using Motorculture mobile app
'92 (MIGHTY) GQ ST 3.0L Duel Petrol / LPG, 2" Pedders Suspension Lift on 33x12.5x15 BigHorns
Lukey 2.5" Performance Exhaust with Extractors, snorkel
Auto Lokka In The Front, Duel Batteries, Stiff Deep Dish Steering Wheel,
This is the stuff I use to remove the left over sticky, its bloody awesome http://www.orangepower.com.au/sticky...goo-dissolver/
Alitis007 (26th March 2014), BigRAWesty (27th March 2014)
Deffinatly not a fun job!
Posting Permissions
Reply With Quote
