Awesome thanks! Do I put this on the 12V or the 24V side?Originally Posted by tiny
Awesome thanks! Do I put this on the 12V or the 24V side?
On the main current draw lead on your stereo. 12 volt side...
chrisc2306 (18th February 2014)
Hi guys had another crack at it tonight before i ordered the capacitors and it was a success. I wired it direct to the battery giving out the 24v to ground so as not to drain one individual battery and the connected a 15A fuse in series with the 24v input before putting it through the convertor and everything worked as it should! Thanks everyone for their time and advice
I suspect the 24 volt supply was dropping with a load.
1991 GQ LWB 4.2 Carby dual fuel, 32 mud claws, 2 inch lift, LSD's front and back
And its Toooooooo High for the Ball & chain
Check for a bad connection somewhere. A resistive joint will drop a lot of voltage under load
Posting Permissions
Reply With Quote