Hey all,
When I got my 3" lift installed the rear swaybar was removed due to the standard links being too short, I bought an extended link kit from Sydney that suits 3-8" of lift. Now what I need to know is do I need to cut the threads to make them shorter or is it like a one size fits all job?
Cheers,
Eric.
Sent from my iPhone using Motorculture mobile app
1998 GU RD28T: RIP
1996 GQ RD28T: RIP 11 days later
Hello 2012 GU CRDZD30
Nissan winchbar + Warn, Dual Battery/Redarc, UHF and Titan rear drawers
Can you post a pic of the ones you bought or a link to them online.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
[QUOTE=trekster;475657]Hey all,
When I got my 3" lift installed the rear swaybar was removed due to the standard links being too short, I bought an extended link kit from Sydney that suits 3-8" of lift. Now what I need to know is do I need to cut the threads to make them shorter or is it like a one size fits all job?
Cheers,
Eric.
Hi Eric,
Yes, you cut them to length to suit.
[SIGPIC]
Leave the nuts on so when you cut them the nuts clean up the thread.
Trekster,
I have just bought similar links I think, and was wondering the same thing....
I have some old cheapy extended fixed length links that are starting to disintegrate, so I was going to see if they would just adjust to a similar length with no cutting....
If it drops below 40 degrees anytime soon, I will go and check
Mic
GU PATROL 2011 Ti, with goodies...
Hey Darren,
http://www.ebay.com.au/itm/360733413...84.m1439.l2649
got em for $84 which seemed a good price.
Cheers,
Eric.
1998 GU RD28T: RIP
1996 GQ RD28T: RIP 11 days later
Hello 2012 GU CRDZD30
Nissan winchbar + Warn, Dual Battery/Redarc, UHF and Titan rear drawers
MudRunnerTD (2nd February 2014)
Trekster,
Mine aren't exactly the same as they are gold zinc plated, but very similar in construction.
Make sure you fully grease the rose joints before you install them
Mic
GU PATROL 2011 Ti, with goodies...
Yeah I am going to go with cutting them too mate. I assume you want the sway bar to be flat and horizontal so set the length and then cut to suit.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Thanks fellas, I'll look into it next weekend I think, Can always reference off the in-laws if need be
Cheers,
Eric.
1998 GU RD28T: RIP
1996 GQ RD28T: RIP 11 days later
Hello 2012 GU CRDZD30
Nissan winchbar + Warn, Dual Battery/Redarc, UHF and Titan rear drawers
Just installed mine, and had to cut a bit off to suit.Thanks fellas, I'll look into it next weekend I think, Can always reference off the in-laws if need be
Cheers,
Eric.
I left as much thread as possible at the ends, to make them as strong as they can be, and it was all too easy...
Mic
GU PATROL 2011 Ti, with goodies...
Posting Permissions
Reply With Quote
