More flex with 2" GU OME lift on GQ or start again?

[Ben-e-boy]

You could look hard and maybe find another product, Australian Made for a similar price and build a kit you want. But Superiors are using state of the art 4340 Chromoly everything, you might save some cash going to Roadsafe but there s not that much in terms of the 4340 components there.

The Armadaextremes and the the Cols for the win. Shop around if you like for the rest bit by bit. Or hit them for a bulk order and expect a balance kit tuned to your car. They say on their site that upon purchase they will contact you directly to discuss the right coils for your car.

I am stoked with my setup and rate all their gear very very highly. Feel free to use whatever though. Superiors for me. Superiors for my GQ because I want the best. Superiors for my GUIV because in the Outback there is No Room for Second best.

It's the sh1t!!!!

But you still don't have long arms

Sorry you left that one wide open

[89gqpatrol4x4]

Was wondering myself if that style of tower brace will fit MR without a body lift??
There looks to be room there for it..
Something I'm doing sooner than later..

I asked that same question in a thread only about 3 months ago, not much helpful info come through though

[TPC]

Looks like you are up for a bit of money, you should start making and selling rooftop bags to pay for it all.

[Ben-e-boy]

So can you fit 35's under a 3 inch lift? Or do you have to lift the body/chop guards to fit?

Chop the guards, you should be able to get away with only trimming the back of the wheel arch

[AB]

Would probably only rub on the back of each arch. Rear quarter chop and slight bending back of the front arches on the rear and it should be ok.

I'm throwing rosscos 35's on my car which is about 2.5" lift soon and will take photos and report back.


Sent from my iPhone using Motorculture mobile app

[AB]

Looks like you are up for a bit of money, you should start making and selling rooftop bags to pay for it all.

I was actually thinking of selling the Toyota god bless it...lol


Sent from my iPhone using Motorculture mobile app

[89gqpatrol4x4]

So can you fit 35's under a 3 inch lift? Or do you have to lift the body/chop guards to fit?

I have worn 35 centipedes and they fit on a 3 inch lift. I have now done a quarter chop and while I was there took about 30 mm of the back of the rear aswell so a brand new 35 centipede will fit under full flex. The front works now on worn ones but I don't think brand new ones will. Having said that I but a worn centipede next to a mates brand new 35 federal couragia and his tyre was only a bee's d#ck bigger. So It might depend on what tyre you run.

[megatexture]

I've just welded in drop out cones and bolted in coil retainers last week and im about to get some armada extreme for the rear of my gu next week. But I'm sticking with 2" coils. And later I'm going to focus on the front as funds permit.

But I'll let you know how It goes when I'm done.

[MEGOMONSTER]

I was actually thinking of selling the Toyota god bless it...lol

I'll swap you a packet of smokes.

[AB]

I'll swap you a packet of smokes.

Dunhill blue or pj?


Sent from my iPhone using Motorculture mobile app