Quote Originally Posted by geckster View Post
OK. thanks a lot for that. Mine needs a bit of similar treatment to what you've done me thinks.

Maybe i'll have a go at getting in there with the die grinder.......
Oh yeah I forgot about that! Definitely need a die grinder or Dremel. I did a heap of work cutting off the bolt heads with the Dremel mate. Newby had suggested cutting a slot to then get a screw driver on them but was never going to happen still on the car. (Mat did this job on a bench)

So grind off the bolt heads then get into it with a 10mm wood chisel, worked way better than a big screw driver.