How's things going with the swap man. Far out there is a fair but if rust in the cooling system. Let me know if ya need a hand. I also need to sort that shelf out will have to measure it and see what you want, let me know once things have calmed down.
Sent from my iPhone using Motorculture mobile app
Live life, Love life.
Snatch straps on towballs can harm and/or kill!!!!!!
So here is an update....... my car has not gone in for an engine swap???
Reasons.... money mostly and just as well with me being so sick I never would have got the other engine ready as it did need some unplanned work.
Got school fees for both kids for next year and some unexpected bills and then to top it off our agent neglected to tell us our tenant was moving out this month so thats 2 mortgages we have to pay... yippee!!!!!
So at this rate I will be swapping the engine only and I will be doing it at home....
Watch this space!!!!
Shout out when you need a hand mate. Don't say ohhhhh I used to wish my time away and all the crap. I am good at passing tools
Bloodyaussie (1st December 2013)
Among other things!!!!!Originally Posted by Winnie
Started the quarter chop today after I got rained out again...
Look at all the crap that was in this panel....
Left a bit extra to play with....... got all the 2 inch steam pipe and inch and a half to do the rest of the bar work also!!
What happened did ysa slip and cut the zorst as well man?
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
What's that wire hanging out the bottom?
Thats my custom slash cut after the last big trip where I squashed it a bit and snapped the bracket.
Scored some 35's yesterday..... he he!!
Looking good mate. Those 1/4's were full mate.
Cheers
Kallen Westbrook
Bloodyaussie (5th December 2013)
The funny thing is last week I had the pressure washer jammed in there for ages trying to get all the clay/mud out... obviously I did not get it all!!!!!
When I was first coming up with ideas for the rear bar it was going to be more your Kaymar type bar so I got square stub axles but now as I am using 2 inch tube I need the round one so I can just hole saw into them and drop in the stub axle and weld it in place.. the place I got them from is down in the south east I can not be stuffed swapping them over, there is another mob in this area but not sure if they use the same set up??
I am enjoying doing this and wish I could spend more time on it!!!!
Posting Permissions
Reply With Quote
