EGR stuff

[mudski]

Hey Col. What the hell is a kweschun?
In order for these mods on a 3Ltr Patrol I would do it in this order...

1. Instal Boost gauge. This has to be installed first as you need to pick up boost pressure and then measure boost pressure to set the Dawes.
2. Instal EGT gauge
3. Instal Dawes and needle valve and set your max boost on the dawes
4. Set the needle valve at 10psi @100k's. (starting point)
5. Instal EGR plate (You may need to re adjust the Dawes after this)
6. Instal Catch can
7. Have beer.

Err. Nevermind about my question on your, kweschun. I got it.