Wow! That's pretty average.
Regardless of its lopsidedness, it still isn't a great fit.....even on the "good side".
They should definitely be doing something about that.
Wow! That's pretty average.
Regardless of its lopsidedness, it still isn't a great fit.....even on the "good side".
They should definitely be doing something about that.
1997 GQ Patrol RX, TB42E. Mods: OME 2" lift, 33" BFG KM2'S, ARB winch bar & reconditioned X9 Superwinch, IPF 900 spotties HID conversion, ARB side steps and scrub bars, Kaymar rear step & spare wheel carrier & jerry holder, Rear 55W LED worklight, Safari Snorkel, 147L LRA tank, Extended diff breathers, dual batteries, GME UHF, Home built drawer and fridge slide, ARB 60L fridge.
If you fitted that yourself I think you'll be stuffed. To them their gear fits, Its the installer..Originally Posted by DAV30
Bought a tigerz bar the other day fitted it nicely but only just realized that you cant adjust the height and its higher on one side
pics speak for them selves it looks ugly got in contact with tigerz in Newcastle sent them pictures but no reply
the old alloy bar fit perfectly on both sides
Cheers
Kallen Westbrook
Yea fitted my self but it's not rocket science. I'll have to give them another call because every time I look at it I notice it first
The car having had a frontal impact, wont help your cause much either.
Well spotted. And a good call.
1997 GQ Patrol RX, TB42E. Mods: OME 2" lift, 33" BFG KM2'S, ARB winch bar & reconditioned X9 Superwinch, IPF 900 spotties HID conversion, ARB side steps and scrub bars, Kaymar rear step & spare wheel carrier & jerry holder, Rear 55W LED worklight, Safari Snorkel, 147L LRA tank, Extended diff breathers, dual batteries, GME UHF, Home built drawer and fridge slide, ARB 60L fridge.
you reckon its had a smash?
everything looks pretty good under the bar all the rails are the same height and length
Judging by the way the strips under the headlight stick out, i would say it has some form of frontal impact.
1999 GU DUAL FUEL 4.5 - 2" OME - 33's KM2s - SNORKEL - CUSTOM DINTS.... Goes by the name Candy (the car not me)
Not so much a smash, but the car looks like it has sustained a "love" tap at the front, just the plastics under the lights, the RH headlight/indicator lamp is pushed back and up, the RH guard looks a little bent in this area also.
Your head lights body/s will most likley be slightly cracked, or your radiator support panel where the lights mount may be pushed/bent a little.
None of this means a huge impact, but id say the previous bar has copped a nudge and moved back into the front of the car a little.
Im not saying the Tigerz bar is OK and its the car, but looking at how your nissan alloy bar sat under the flare before hand, perhaps something may be not quite 100% right with the car side of things ?
My Tigerz basket is now fitted, very happy with it actually.......
As i do a lot of beach work, I replaced all the bolts/washers with stainless, i also dumped the spring washers, and went for nylock nuts, i worked out i could run 5 mm shorter bolts up top, then i would not have any thread hanging down, as this bit could perhaps catch your arm on when washing the roof, and was not needed anyway.
Time will tell if this was a mistake, or ive saved some money, at the moment "im" the only thing thats been on it, (walking around up there), but appears to be more than strong enough for my needs, and overall great value, its so light its fantastic.
Looks good on the plastic fantastic (white) GU bud..... Did you go steel or alloy?
Last edited by Clunk; 29th November 2013 at 02:58 PM.
04OFF (29th November 2013)
Posting Permissions
Reply With Quote
