Autron EGT / Boost gauge

[Hodge]

My pillar has arrived, but gauges I've been waiting on forever haven't so I'm just gonna splash out on the Autron.
For those of you with the Autron gauge...
I need to ask is, what else do I need to buy along with this ? Or is it just about a complete kit?
Looking at getting this.
http://www.ebay.com.au/itm/Autron-LC...dca89ee&_uhb=1

Reading that, as far as I understand it taps into the MAP sensor on the intercooler. Correct?
Or if not, will I need this quick-fit unit as well ??
http://www.ebay.com.au/itm/Quick-Fit...cfff82d&_uhb=1

I though I'd ask you guys, if I'm missing anything else, as I want this fitted ASAP to sort out my NADS. My dump pipe already has the bung there to tap into.

Thanks ahead!

[Hodge]

Gauge ordered. Should be here by Friday I hope.

[Lemo79]

Hey Hodge, you won't regret the Autron, I love ours. You will need the quick-fit as well, or like I have done put a brass barb in the IC pipe. If you haven't already got a spot for the egt probe, which you won't if you have standard exhaust you will need either the hose clamp system or weld the bung in that comes with the probe. I also bought the extra temp sensor to use the third function on the guage, but you can add that at any time. Have a look at my thread, I just added some pics the other day.
http://www.nissanpatrol.com.au/forum...-s-Black-GU-IV

Lemo.

[MEGOMONSTER]

I purchased the light controller also with my order.

[Lemo79]

I purchased the light controller also with my order.

Yes, I find I have to have the lights dimmed all the way so it's not to bright, then the dash lights are a bit to low. I am going to experiment with a few resistor values to dim it a bit further, then I can continue to use the factory dimmer.

[MEGOMONSTER]

Yes, I find I have to have the lights dimmed all the way so it's not to bright, then the dash lights are a bit to low. I am going to experiment with a few resistor values to dim it a bit further, then I can continue to use the factory dimmer.

With the controller, I don't have this problem.
I also go white dial during the day, and orange at night to match the dash lights.

[Lemo79]

With the controller, I don't have this problem.
I also go white dial during the day, and orange at night to match the dash lights.

Does the light controller change the colours automatically when you turn your lights on?

[Hodge]

Thanks a lot for your input Lemo and mego. Ordered the quickfit gauge now too. Can't wait for everything to arrive so I can bolt it in, and then fit the NADS.

[MEGOMONSTER]

Does the light controller change the colours automatically when you turn your lights on?

Yes it's programmed that way, for two light settings

[Lemo79]

Yes it's programmed that way, for two light settings

Sounds great, that might be the option for me, thanks for the info.

Lemo.