[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
[IMG]
TB42E manual 1996 GQ 30 year anniversary
33" maxxi bighorns, 3" EFS & Accessories
AB (1st July 2013), Jimmyboyjr4 (29th August 2013), my third 256 (24th October 2013), NissanGQ4.2 (1st July 2013), oncedisturbed (20th October 2013), Warwick89 (20th October 2013)
Neat finish ozzy!!
Sent from my iPhone using Motorculture mobile app
ozzyboy (3rd July 2013)
Very nice very well thought out set of drawers you got there mate
ozzyboy (3rd July 2013)
How'd you keep the cost down so low? Left over stuff from other projects?
They look really good man, makes me want to rebuild mine and do something similar.
Sent from my iPhone using Motorculture mobile app
Live life, Love life.
Snatch straps on towballs can harm and/or kill!!!!!!
ozzyboy (23rd September 2013)
Originally Posted by soundfx
2 sheets of ply and a couple off cuts courtesy of work . cost = $0
Carpet was a end of roll at bunnings. ( can't remember exactly, but buggar all )
Screws, glue etc I think 30 bucks tops
I stayed away from runners or bearrings for 2 reasons. The laminate on the marine ply slides easy on the base laminate. Not easy enough that they slide by themselves but easy enough. Other reason was the cost. a good set of runners would have doubled the build cost.
I went the height I did to fit whatever I like in the drawers, fit the 80l waeco on top, fit a duel battery in the rhs compartment, all recovery gear in lhs compartment, and the sub in the face
cheers
ozz
TB42E manual 1996 GQ 30 year anniversary
33" maxxi bighorns, 3" EFS & Accessories
AJTich (20th October 2013), oncedisturbed (20th October 2013)
Man, that is great. I've seen a pic of what I want for mine, and your pics, and setups make me think I could do it too.
Can only hope it looks as good as yours.
A&J
ozzyboy (24th October 2013)
Good job on the setup and finish
2009 GU ST 4.8L AUTO WAGON, 2" OME LIFT, 33" A/T'S, ARB DELUXE BAR, WARN XD9000 WINCH, NARVA 170 SPOTTIES, SCRUB BARS / SIDE STEPS, LONG RANGE TANK, DUALL BATTS, REAR DRAWER SYSTEM, ARB AWNING, KAYMAR REAR WHEEL CARRIER, 3" ZORST
www.swat4x4.com
Nice finish mate, better then a bought one.
ozzyboy (24th October 2013)
Great build, If you had to buy the ply would you go with the same? Supporting batteries and serious speakers would be better in a heavier construction.
It looks like 19mm which is fairly heavy, as you say the surface is good for the drawers to slide and that is only on that 19mm form ply.... I think.
A lighter ply if used could be fitted with that "Teflon" strip as Drifta Kitchens use. Corners can be reinforced with 40x40x1.4 mm aluminium angle ($26.00 per 3mtr from Bunning's) I am always looking at keeping the weight down.
Like the design and use of space, a good DIY for a good price.
Cheers
Macca
ozzyboy (24th October 2013)
Posting Permissions
Reply With Quote
