Outback Ideas Recovery points

[TPC]

Just finished painting the rear point flat black. Looks great.

Are the original bolts back there good enough to reuse?

Also not sure if its in this thread but the bolts on the factory recovery point. WTF?
A 19mm socket relates to an m12 bolt, well every bolt I've had but not these they are bigger.

What size are the front bolts and where can I get some from on a Saturday?

You should be able to get high tensile M12 bolts from Repco on a Saturday.

[threedogs]

I think they are 14mm x 1.50 pitch, and 50mm is long enough.

[Shaun 4x4]

I think they are 14mm x 1.50 pitch, and 50mm is long enough.

Cheers. Will have to go hunting.

Also did you just reuse the rear bolts for the back recovery point or get new ones?

[threedogs]

They should be long enough I just sprayed the heads

[Shaun 4x4]

Either they aren't a 1.5mm cut or the dam shop gave me the wrong bolts!

[AB]

Hi Everyone,

I would like to welcome John (Outback Ideas) to the forum as our latest Vendor Sponsor. John is well known in the industry for his quality recovery/tow points and has also ventured a little bit into lights, etc so please have a look at his first post in this thread to see what he offers and thank you for your support Threedogs!

[MudRunnerTD]

Yeah but will he contribute to the forum??? Or just here for the manuals??

Well done John.

[Bloodyaussie]

Yeah but will he contribute to the forum??? Or just here for the manuals??

Well done John.

Daz you are funny like a brick!!!!

[meh]

Got a set of these, Love them!

[BigRAWesty]

Good to see you joined TD.