The fatz fabrication item is pretty good
The fatz fabrication item is pretty good
There is a few on EBay that I was looking at for a mate
http://www.ebay.com.au/itm/NISSAN-PA...item2c70e34e2d
or
http://www.ebay.com.au/itm/GQ-Nissan...item416905000c
Mic
GU PATROL 2011 Ti, with goodies...
Here is a link to some better under bonnet pics of the Patrol Doctor box and snorkel. rrp$750
Patrol Doctor Air box on MudRhino
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
PMC (13th August 2013)
Hey Ben,
I have the PatrolDocta ZD type airbox on my GQ and I am really happy with it.
It has 4" inlet and 4" outlet to the turbo, seems to breath really well, I also run a K&N filter in it. And have a ryco paper type for when the K&N needs a clean and dry.
It's made from all stainless and sits nicely under the bonnet.
101_1701.JPG
Mark
Proud former owner of a 1997 White GQ TD42 Patrol Cab Chassis with an after market turbo, now with over half a million k's and still going strong, that's had a heart transplant and now not owned by me
I have the same box and mine is 3.5" in and out?
Trying to use Motorculture
Winnie,
I don't know if they changed the size of the inlets and outlets but I know mine are 4"/100mm because of the silicon fittings I had to chase up for it.
Mark
Proud former owner of a 1997 White GQ TD42 Patrol Cab Chassis with an after market turbo, now with over half a million k's and still going strong, that's had a heart transplant and now not owned by me
Thanks for your input everyone
Well I rang fatz fab today, they are going to send me some pictures or one in a gq
Ill ring millweld and try to get some flow figures and see if it will suit.
Mark, I would go for the one you have for fitment etc, but it dosnt actually flow enough to suit my application, I need something much bigger
Cheers
Ben
96 GQ coil/Cab
08 G6eT
That's what I got too. My old Zd30 box was leaking and just got one of these due to the snorkel position and limited room under ze hood.
Look forward to seeing your beast when It's all done though Benny!!!
Millweld do a stainless ones, or 4by fabrications do a alloy billet one.
G'day Trendsetters,
After fitting the new 18G billet wheel Kinugawa turbo set-up.I am now back to square one regarding air in take issues.
The new set-up is collapsing the intake hoses again. The current set-up worked fine with the UFI TDO5 16G turbo set-up, however, the more powerful Kinugawa turbo set-up requires more air-flow.
PS, i will keep you all informed of my research.
Regards,
RLI
The halls been rented the bands been paid, time to see you dance!
Posting Permissions
Reply With Quote
