Went to fit up the LoadPlus but are slightly longer and doesn't fit under the chassis of the trailer.
Oh well back to the drawing board.
Went to fit up the LoadPlus but are slightly longer and doesn't fit under the chassis of the trailer.
Oh well back to the drawing board.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Spewing. Well I'd still go the air shocks..
Kallen Westbrook
Owner of
Westy's Accessories
Cheers
Kallen Westbrook
Mego when I had a HD standard sized trailer and wanted to drag it up creeks and over sandhills around Alice Springs I turfed the short trailer springs and put a set of triton rear leaves in .They are a two main leaf with eyes both ends and from memory a 5 pack spring and all I did was take the bottom 2 leaves off which gave me a soft riding trailer that didn't bounce around and no shockies as the leaves will give you a damping effect as they compress. Cost 6 stubbies and 4 new eye brackets as they were a bit wider but still a standard trailer spring pack size .Never had a drama and that trailer went every where.
U have 4 choices in life :U can like it; lump it; love it or shove it, take your pick and stick to it !
MEGOMONSTER (26th July 2013)
Purchased a set of ARK leaf spring pack, rated to 1000kgs, hopefully won't be to stiff fir the boat.
Looking at the old springs closely today, found them to have sagged probably 2". Really sitting low. Never noticed it sitting so low.
I fit em up and see how it sits.
I went for this cos of ease of fitment and no modifications.
Last edited by MEGOMONSTER; 27th July 2013 at 11:50 AM.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
BigRAWesty (27th July 2013)
@ Mego are your springs slipper style or Eye to eye style. If you need more height I have a quick fix
@ Kallen why don't I just make extended shackle plates to achieve a bit more lift.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
They slipper type.
Lift is NOT what I require, otherwise the trailer needs to be further in the water for me to launch.
It is only a short trailer.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
not sure of the term but why not get them re scragged at Brooklyn spring works.
that's who I'd be talking to
04 ST 3lt auto, not enough Mods to keep me happy, but getting there