Factory Rear Locker - LS1

[Thirsty]

Hi Guys,

I have connected the factory rear locker tank to the small vacume line off the back of the manifold. I have also put a check valve in as well. I cant seem to get the rear locker to engage. Would it be best to tee off the brake booster hose to try and get more vacume?
cheers
Troy

[happygu]

Did the locker work before the LS1 was installed, as the factory solenoids have a habit of playing up?

Mic

[Thirsty]

Did the locker work before the LS1 was installed, as the factory solenoids have a habit of playing up?

Mic

Yeah Mic, It worked perfect. I've never had any issue's with it. Touch wood LOL

[happygu]

Try to create a vacuum by sucking on the tube near the solenoid, and see if it clicks in and out.

[happygu]

Try to create a vacuum by sucking on the tube near the solenoid, and see if it clicks in and out.

Locker switch will need to be on too....

[Thirsty]

Locker switch will need to be on too....

Thanks mate, That gave me a starting point. It seemed that the vacuume off the fuel reg that I had been meaning to disconnect was taking all of the vacuum. I blocked it off and walha, it works.
Cheers Again, I appreciate your response.

Troy

[happygu]

All good....easy fix too