OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33

Thread: 3ltr Smokes when spools/Boost

  1. #1
    Expert pbk1776's Avatar
    Join Date
    May 2013
    Posts
    119
    Thanks
    1
    Thanked 16 Times in 14 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    3ltr Smokes when spools/Boost

    Hi All

    I know it's been tackled before - however I have a different situation here and doing the precautions and maintenance read from my research.

    I have a zd30 engine in a 2000 GU - it has a DPchip diesel in it - and it blows smoke while on Boost - however I also noticed that the boost goes flat - seems to be leaking somewhere, but I am not sure.

    So what I've done so far

    1. replaced oil and all the filters
    2. Used a bottle of Injector cleaner

    I am planning to do is

    1. Change AFM/MAF sensor
    2. check all pipes see if there are leak
    3. might ring a diesel mechanic or tuning shop

    my question is
    am I going to the right direction or doing the right precautions? or do I have to do something else
    please advise

    BR
    PBK

  2. #2
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    yeah all seems right, clean maf with some spray from SCA or jaycar, you'll be surprised, save some coin too.
    what number is your chip on if its wound up to say 7 or even 9 it will blow black smoke everytime, dial it back to 5
    I've found a happy spot at 5 even towing it's fine, after you remove engine cover check rear right intercooler hose
    blue on my motor they tend to pop off if you don't have nads. check and tighten all other hoses, even small vacuum ones.
    Attached Images Attached Images
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  3. #3
    Expert pbk1776's Avatar
    Join Date
    May 2013
    Posts
    119
    Thanks
    1
    Thanked 16 Times in 14 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by threedogs View Post
    yeah all seems right, clean maf with some spray from SCA or jaycar, you'll be surprised, save some coin too.
    what number is your chip on if its wound up to say 7 or even 9 it will blow black smoke everytime, dial it back to 5
    I've found a happy spot at 5 even towing it's fine, after you remove engine cover check rear right intercooler hose
    blue on my motor they tend to pop off if you don't have nads. check and tighten all other hoses, even small vacuum ones.
    Thanks Threedog - I will get a spray from SCA then remove the cover - with the DPChip I just bought the vehicle and it came with it
    where is it located? thanks mate

  4. #4
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    usually cable tied up under the steering wheel more to console side half the size of a box of cigs red/black with clear cover
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  5. #5
    Expert pbk1776's Avatar
    Join Date
    May 2013
    Posts
    119
    Thanks
    1
    Thanked 16 Times in 14 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by threedogs View Post
    usually cable tied up under the steering wheel more to console side half the size of a box of cigs red/black with clear cover
    thanks mate - previous owner will also send me photos where it is located

  6. #6
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Only need a very small flat screwdriver to wind it back to 5
    very easy to adjust BTW
    Once all this is sorted I'd strongly advise that you install at least a Boost/EGT gauge
    This will help monitor whats happening under the bonnet, great peace of mind for ZD30 owners
    Just one part of the NADS proccess
    Attached Images Attached Images
    Last edited by threedogs; 24th July 2013 at 10:39 AM.
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  7. #7
    Expert pbk1776's Avatar
    Join Date
    May 2013
    Posts
    119
    Thanks
    1
    Thanked 16 Times in 14 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by threedogs View Post
    Only need a very small flat screwdriver to wind it back to 5
    very easy to adjust BTW
    Once all this is sorted I'd strongly advise that you install at least a Boost/EGT gauge
    This will help monitor whats happening under the bonnet, great peace of mind for ZD30 owners
    Just one part of the NADS proccess
    Hi ThreeDogs - I will invest on both gauges by next month

    I also just got back from SCA - got myself a MAF sensor cleaner and more injector cleaner

    I will wind back the DPchip as I located it already - but how will I know if it down to 5?

  8. #8
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    There should be numbers where you insert screwdriver zero to 9 , very small may need torch
    Spray heaps on MAF don't touch with fingers and when dry re install
    Remember where chip is first before adjusting if possible
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  9. #9
    Expert pbk1776's Avatar
    Join Date
    May 2013
    Posts
    119
    Thanks
    1
    Thanked 16 Times in 14 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by threedogs View Post
    There should be numbers where you insert screwdriver zero to 9 , very small may need torch
    Spray heaps on MAF don't touch with fingers and when dry re install
    Remember where chip is first before adjusting if possible
    It is already on 5 - reckon to go down further?

  10. #10
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Yeah but could be a boost issue as well is it sluggish or drive ok
    Turn back to 3 and see what happens, What area are you in BTW
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •