Pod, EGT / Boost gauge suggestions

[Hodge]

So i'm getting the exhaust fitted and figured I might as well add the boost / egt gauges into a pod.
This is what I've found so far.
2 gauge x 52mm pillar pod.
And for the gauge.
EGT / Boost gagues in one Autron

For those who run this setup / gauges, did they come with everything needed to install? I know my beaudesert has the egt bung, so I want to make sure I got every that's needed to tap into that. But I'm not sure about the boost gauge and where that gets picked up from.
Thanks ahead.

[Bigcol]

yes, you get every thing you need for the EGT/Boost gauge, depends on what you are putting in the second "hole" of the pod

I brought my gauges from Extremelimitsoffroad, great guy to deal with (plus he has the pillar pod cheaper than the one you linked)
if you buy them both through him, he does a good deal for you
IMO

I brought the 3gauge Autron's from him, EGT/Boost/Inside Temp, Water Temp/Oil Pressure/outside Temp and Batt1/Batt2/AMPs and the pillar pod, and the goodies for the others (Hall effect cable, 2xtemp probes and gauge controller
he did a REAL good price for all that kit, and it works a treat.

you wont go wrong with them

cheers

[Hodge]

Thanks for the reply mate. I was thinking the Batt1/2 in the second hole since I'm getting the dual batt system done soon as well. I'll take a look at Extremelimitsoffroad.