Briggs and Stratton Service Parts

[taslucas]

And another successful hijack bwahahahahahahaha

seamless...............

[nissannewby]

Some Supercheap stores carry this sort of stuff might be worth a look in.

[AB]

Bunnings is useless.

I drove to the next town which has a mower store....job done!

My engine model doesn't have an oil filter...wtf???

[Bloodyaussie]

If I were alive earlier I would have told you they are useless for this sort of stuff...... the last time I actually put my ride on in a shop as I was taking holidays and thought what the hell I will get someone else to do it the bill came to $700 $%$£$$£%!!!!!!!!!!!

I get my stuff online now and do all my own work..

Never run Bunnings brand oils in either your 4 or 2 stroke engines.. 2 strokes I use motorcycle oil and not the cheap stuff but in the end its cheap insurance!!

[BigRAWesty]

Bunnings is useless.

I drove to the next town which has a mower store....job done!

My engine model doesn't have an oil filter...wtf???

Nope, they run the pickup slightly higher than most. Mine doesn't either. But that's why they ask you to change it every 10 hours..

Kallen Westbrook
Owner of
Westy's Accessories

[growler2058]

Bunnings is useless.

I drove to the next town which has a mower store....job done!

My engine model doesn't have an oil filter...wtf???

Phukin briggs

[AB]

If I were alive earlier I would have told you they are useless for this sort of stuff...... the last time I actually put my ride on in a shop as I was taking holidays and thought what the hell I will get someone else to do it the bill came to $700 $%$£$$£%!!!!!!!!!!!

I get my stuff online now and do all my own work..

Never run Bunnings brand oils in either your 4 or 2 stroke engines.. 2 strokes I use motorcycle oil and not the cheap stuff but in the end its cheap insurance!!

Yeah mate I hear ya!

$50 in genuine filters an oils, an hour of time job done!!!

Not hard really and probably saved a couple of hundy!

[Bloodyaussie]

I have become an expert at my Torro with a 17hp Briggs and a 44 inch deck which in some ways saves me time on jobs but with 3 blades is a lot more complex to work on and costs more for repairs..

Last job out I did not realise the deck dropped down to the lowest setting and seized up the centre bearing, pisses me off as I only replaced all the bearings in the deck about 15 hours ago.

After the shop charged me a fortune the first time I found so many stuff ups so knew I could only trust myself to work on it... plus while I am fixing one thing I pick up on other little things that might need attention.

I charge a much higher rate for using the ride on and some people say why its so easy you just sit on your ass and in no time the job is done??? bloody idiots!!!

[NP99]

Ride on mowers are bloody dear for what they are! I learnt a lot keeping mine going.......

[Sanouske]

Prob worth while just going to a lawn mower joint. Bunnings are pretty useless at times. Pending the person...