X2 with this. At the top.Originally Posted by MudRunnerTD
X2 with this. At the top.
so the rubber insulator that seats in the top of the spring does not interfere with this.
3lt GU 111 Wagon 2 inch lift,3in Taipan exhaust, cross country intercooler,catch can,EGR blocked, dawes and needle valve,Pyro/boost gauge ARB lockers,steinbaurer chip, long range tank, s/s water tank, draws, warn winch, and other stuff.
no not at all mate it will just mould around the keyway.
The rubber is mostly there just to keep the things quiet. so it is not metal on metal. they are about 3mm thick and have 3ton of car sitting on them so they will adapt
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
june (15th June 2013)
ordered insulators{$42 each from Nissan} and waiting on springs to arrive{tough dogs} thanks everyone for their input
3lt GU 111 Wagon 2 inch lift,3in Taipan exhaust, cross country intercooler,catch can,EGR blocked, dawes and needle valve,Pyro/boost gauge ARB lockers,steinbaurer chip, long range tank, s/s water tank, draws, warn winch, and other stuff.
Posting Permissions
Reply With Quote