Today i bought a sony head unit 1 Din and a Sony - Nissan connector but when i try plug up my existing nissan plugs into the new Connectors they don't line up at all? APP0120 is the product code for Nissans 1995 + Help ?
Today i bought a sony head unit 1 Din and a Sony - Nissan connector but when i try plug up my existing nissan plugs into the new Connectors they don't line up at all? APP0120 is the product code for Nissans 1995 + Help ?
Yeah they won't....
If you're not handy with a soldering iron and crimp tool then jump in eBay and search for an iso adaptor for your head unit
Red 2.8 (8th June 2013)
Ahh , so super cheap just bullshitter me and I really should just cut the wires and solder them myself? So i run the Sony - Nissan Iso , then cut the End plug and run it into the existing Nissan Plugs with a solder and tape up?
http://www.youtube.com/watch?v=jZkrASNXI6o , at 6 minutes in exactly he starts explaining it , This is where i'm confused. I bought the same products but he doesn't show how he did it.
There are dedicated Aerpro harnesses that are straight plug n play roughly $20
Never underestimate the power of the Tap.
2009 GU ST 4.8L AUTO WAGON, 2" OME LIFT, 33" A/T'S, ARB DELUXE BAR, WARN XD9000 WINCH, NARVA 170 SPOTTIES, SCRUB BARS / SIDE STEPS, LONG RANGE TANK, DUALL BATTS, REAR DRAWER SYSTEM, ARB AWNING, KAYMAR REAR WHEEL CARRIER, 3" ZORST
www.swat4x4.com
That's the product i've bought but now i'm really lost , I have three plugs , not two =l, which means they've probably had a radio in it , then replaced once sold to me.
Is there any chance you can take pics of connectors you have? Maybe that way we could help you figure out whats going on.
2005 TD42TI
Last edited by MudRunnerTD; 9th June 2013 at 11:39 AM.
IIRC when I did mine, I had to buy alpine to iso, then iso to nissan....
You need to get the right adaptor harness and this depends on the year model of your Patrol.
Posting Permissions
Reply With Quote