Outback Ideas Recovery points

[Gstone]

I have a 2012 GU, and thought I'd throw up some images of the locations these points fit in case it helps anyone else.

I purchased the "folded" recovery points for the 2 captive nut type attachment originally, prior to getting the bullbar installed. Those recovery points attach here. If I was a smarter man, I would have fitted it before the bullbar was installed, which makes it more difficult.



The other recovery point in the "T shape" also looks like i can be fitted with the bullbar, in this position:



I'm undecided on which is the better option, but I will try fitting the folded ones and see how it goes.

[Blacklotusdog]

I also have GU8, have attached pic of my installed folded type points.

[threedogs]

Thats one big pic man I cant figure it out,
Should bolt up like pic above. What model/motor/bar do you have again
Long distance guessing not a strong point of mine, but we'll get it sorted
either one will fit, all three styles will fit mY TJM T16 outback bullbar

[Gstone]

I also have GU8, have attached pic of my installed folded type points.

Fitted them today. Will be interesting to see if the shackles do any damage smacking against the bottom of the bullbar from this location. I'd suggest the T shaped points for other with a similar setup I think.

[phelonius]

Yes that the one, don't forget to back cut as you do it.
meaning start cutting thread then reverse your action you will feel it cut
any steel off then screw a bit more and back cut,
keep going till all the way through . don't lose tap in chassis.
basically just take your time

Turns out my bolts where m14 x 1.5.
I found this out after waiting a a week to get an m12 tap.
Anyway got it in tonight and it looks good.

[threedogs]

Looks good You can fit one to the LHS but a bit labour intensive
Those two extra holes are if you want to bolt a black hook to it

[billy bleed]

Another outback ideas product for my patrol - Picked it up this morning whilst hassling 3D to help me with my gas bottle mounts.. and its great workmanship!!

ImageUploadedByTapatalk1369281734.730131.jpg


I am made up of the following parts.. Black Irish / Gypsy / Tattoo's and Grumpiness.. and this was sent from my phone using Tapatalk!

[FNQGU]

Threedogs,

What did you say those extra two holes could be used for on the GU-I recovery point?

By the way, very happy with it. I had to grab this one from TJM before a trip this weekend, but could you PM me a price for the bush-hook at the rear and the other ring type rear recovery point please?

BenK

Sorry, should have looked up two posts... what black hook are you referring to?

[threedogs]

PM sent, Those extra holes allow you to bolt a 5000lb hook to it as well.
Try to avoid the Chrome hooks as Ive found them to be brittle.

[NP99]

TD, how does the rear point attach to the vehicle?