Torque settings

**Stokezi** · 20th April 2013, 04:32 PM

Hi need torque settings for injector hold down bolt 12ml for a zd30 gu 3
cheers

**threedogs** · 20th April 2013, 05:52 PM

I can't find any torque settings in Ellery manual

**Stokezi** · 20th April 2013, 08:32 PM

does anyone know if 120lbs sounds correct

**threedogs** · 20th April 2013, 08:49 PM

Re read the whole article no reference whats so ever, Sorry bout that

**jgoose** · 20th April 2013, 08:56 PM

Hi what size is the bolt/stud??

**jgoose** · 20th April 2013, 09:01 PM

If its an 8mm bolt /stud it should be 27nm or 20ftlbs

**Stokezi** · 20th April 2013, 09:19 PM

12ml injector hold down bolt

Originally Posted by jgoose

If its an 8mm bolt /stud it should be 27nm or 20ftlbs

**jgoose** · 21st April 2013, 07:25 PM

95nm 70ftlbs going by my specs on bolts

**jgoose** · 21st April 2013, 07:28 PM

95nm. 70ftlbs

**Stokezi** · 21st April 2013, 08:34 PM

can you tell me where you came across the specs cheers

Originally Posted by jgoose

95nm. 70ftlbs

User Tag List