Quote Originally Posted by BLKWDW View Post
SO something line this at each end http://www.ebay.com.au/itm/CIRCUIT-B...ht_1689wt_1271

Can i use the fused terminals at each end instead or are the breakers a better option
http://www.ebay.com.au/itm/PROJECTA-...ht_4465wt_1037
http://www.ebay.com.au/itm/DUAL-BATT...#ht_771wt_1271

Also the larger cable i have is 3b&s 26mmsq 215amp rated and smaller one is 6b&s 14mmsq 140amp rated
I personally prefer circuit breakers for this type of installation.

Yes you can use fuses. Sometimes finding replacement fuses can be a pain and expensive.

Also if using a ANL type fuse you will probably need to go up to a 100amp fuse.

Either one will be fine.