Member on hard times parts list

[Alitis007]

Do you want a can of Hand Cleaner ??????

Might aswell bring it i was going to bring some but i'm not sure what time i will get to Andy's

[mudski]

Yeh i can make one no dramas just need the nuts to weld to the plate that way will save someone carting a welder!

By memory its 3/4 sized bolts. So, 3/4UNF x about 1 1/2inch long would suffice. I have a small Cig Weld Arc welder I can bring to andy's if need...If its going to get done there that is.

[healy]

Do you want a can of Hand Cleaner ??????

Ba and mudski might need it tho from the sound of things

[Bloodyaussie]

By memory its 3/4 sized bolts. So, 3/4UNF x about 1 1/2inch long would suffice. I have a small Cig Weld Arc welder I can bring to andy's if need...If its going to get done there that is.

I have to go and get a bunch of high tensile bolts for the front bar as they are rooted and I was going to raid my donor GQ for heaps of nuts and bolts and clips and so on???

[mudski]

Ba and mudski might need it tho from the sound of things

Like I said mate. No Spoon for him!!! It will be me, myself and a bottle of lotion for the noight!!!! Oops!

[Bloodyaussie]

Get back on topic you idiots!!!!!!

I have a huge bag of rags also and 3 tubs of hand cleaner and do I need to bring my big compressor and rattle gun??

[healy]

Get back on topic you idiots!!!!!!

I have a huge bag of rags also and 3 tubs of hand cleaner and do I need to bring my big compressor and rattle gun??

talk ya self up mate big compressor ha

[Alitis007]

Oiii lady's !!!! Settle down!!

The bolts we need are M14X 1.5 - 30mm long, they will do the bar Jonathan make sure you get zinc coated ones also spring washers and 3 Nuts for the recovery point.

Mark imperial is no good, you wanna stick to metric just incase the bolts get mixed up they're all the same thread!!!!

I'm going to check the Friction disc of the clutch suits the box now and check the condition of the oil too before i leave work !!!!!!!

[Bloodyaussie]

I hate imperial...... the metric system rules..

Yes Healy a big compressor.......???

Also should I bring Peters engine crane??? actually I think I should as I lifted the front bar today without a winch in it and it was bloody heavy.

Peter and I have fitted a few front bars with winches and it has made it a breeze..!!!

[Winnie]

I hate imperial...... the metric system rules..

Yes Healy a big compressor.......???

Also should I bring Peters engine crane??? actually I think I should as I lifted the front bar today without a winch in it and it was bloody heavy.

Peter and I have fitted a few front bars with winches and it has made it a breeze..!!!

There will be 50 odd blokes there I'm sure we could lift a bar.


If you're happy and you know it tap a post!