Help needed for a member on hard times.

G'day Trendsetters!

Count me in!

Farken busted my arse yesterday helping Steve (Astro) fit his new TD05 16G to his Patrol at my place. Started at 9.00am finished at 1.00am in the morning. Unfortunately, the previous owner had fitted different size nuts to bolt the turbo to the exhaust manifold. We drove around 6 tool shops in Coffs Harbour trying to by a moon spanner to no avail.

In the end my mate Rob from (Robs engineering) in Coffs Harbour welded a steel rod to a 13mm spanner that we decided to modify for the job.

I have fitted a couple of the Nissan Patrol 3lt dual mass flywheel clutch set-ups. Do we have access to a work-shop and hoist? If not what about a gear-box jack and a shed to work in?

I have enough frequent flyer points to fly down to Victoria to help fit the clutch with nissannewby. Jas all you have to do is make me coffee. lol

PS, I have to go back to the Wesley Hospital next Thursday to see my specialist. Let me know a date when you want to do the work.

Regards,

RLI