td42 engine

[andrew_nicolson]

i am looking for a td42 engine for my patrol or someone that can rebuild my old engine as it is dead over heating with a nocking sound

[MudRunnerTD]

Hi mate, please head over to the introduction section and post an intro met, we like people today g'day when they come in to this place, it's polite.

Cheers mate.

[BigRAWesty]

G-day mate.
Umm. Good luck finding a cheap 4.2 in good nick.
Your best bet would be a rebuild.
You can buy kits as the 4.2 are a sleeved block.
With a bit of common sense, mechanical knowledge and a mate you can easily do most the work yourself.
You'll just need the block head machined flat again as the selves will sit proud a little. And a slight hone won't hurt either.

But it should be about $2000 for a rebuild. Very cheap really..

Plenty of info here and if you get up to the 25 posts grab the manuals as they are a wealth of knowledge to assist you with repairs..

Kallen Westbrook
Owner of
Westy's Accessories

[andrew_nicolson]

i have a manual for the patrol

[BigRAWesty]

i have a manual for the patrol

Top start..
Kits are here
http://www.ebay.com.au/itm/NISSAN-PA...-/110694590315

A little more expensive than I last saw. But still $2500 should well and truly see the rebuild complete.

Kallen Westbrook
Owner of
Westy's Accessories

[SupRob]

Hey,

I can get you a price on a good quailty rebuild kit, send me a email, td42 n/a just need month/year.

Regards,

Rob

[andrew_nicolson]

it is a 3/89 td42 diesel 4.2ltr

[andrew_nicolson]

thanks kallen i have them on my watch list already but don't have the money to get it but thanks

[Bloodyaussie]

What area are you in...??????

[andrew_nicolson]

Maryborough Queensland