replacing factory radio/ cd player

[beexy]

gday all. am replacing the factory double din head unit with a single din uhf and stereo. has anyone done this before (sure someone has). do you have photos. mate of mine who is a sparky and pretty handy with this kinda stuff said he can do it for me. just wondering though, does a bracket need to be made or fitted to stop the units moving around. my mate assumes yes but not his type of specialty doing that. anyone who has done this and has photos or ideas is appreciated.
cheers
breno

[the evil twin]

I assume a GU is a GU and all the same? On my GUV...

If it's a genuine single din size aftermarket it should bolt up straight to the hardware that held the double din factory unit. At worst you may need to drill a couple of holes.

The factory bracket is a hollow square held into the dash by 4 screws thru flanges on the front... the only challenge may be an appropriate surround or fascia

[oncedisturbed]

Have a look in my build thread and there are pics there frim memory from when I did mine

Facsia is the same, you will need a pocket insert, after market aerpro plug and play wiring harness and an aerial adapter to change from oem to generic and all done, takes half hour or so the change

Tap, Tap Taparoo

[threedogs]

X 2 with above you should just need the single din dash pocket, CAUTION there are 2 styles

[my third 256]

doesnt need the pocket as he is putting in a uhf radio and a sterio and used the original bracket and wiring harnes from auto barn $15.00
300_0097.JPG
this is what i did in my gu and below is with the flip out screen
300_0098.JPG

[beexy]

256 thats exactly what im looking at doing. have got the plug and play from autobarn. did you make up a bracket to surround it or does it sit pretty snuggly as it is

[Coldcomfort]

When you do yours can you put a pic up of how to get the facia off....??

[wildgu6]

If your talkin bout the face plate on the double din there CC, along the bottom of the faceplate you will feel 2 slots, use a screwdriver it the slots to pop it out, to easy mate


TAP TAP TAP MERRY XMAS TO ALL AND A SAFE NEW YEAR TO COME

[my third 256]

256 thats exactly what im looking at doing. have got the plug and play from autobarn. did you make up a bracket to surround it or does it sit pretty snuggly as it is

goes straight in and is a snug fit no bracket was made used old one

[BigRAWesty]

As mentioned above, when doing a double instal it should fit straight in.
But for future if needed you can buy double din frames from auto barn, repco etc.


Kallen Westbrook
Owner of
Westy's Accessories