hey threedogs i like the recovery point on him did you make that one too lolOriginally Posted by threedogs
hey threedogs i like the recovery point on him did you make that one too lol
2007 GU 6 /ST-L / MYO8 / DIESEL/AUTO /MOONSTONE /pro vent 200
OH LEATHER IS NICE
Hi threedogs. Got a GU 8 - I'll PM you for a price but after two of them. Been meaning to hit you up for them!
Jas
__________________________________________
Roads? Where we're going we don't need roads.......
2012 Silver GU 8. Bullbar, Warn XD9000 winch, snorkel, towbar, roof bars and rack, awning, 33" Mickey Thompson ATZ 4ribs, 2" lift - Dobinsons coils and Koni shocks, more to come......
2013 Travelling Wilbury's Cape York Trip - bring it on!
WARNING: Towballs used for recoveries can, and do kill people and damage property.
bolts wont go through the holes
[ATTACH]
300_0096.JPG[/ATTACH]
will have to file out holes
you might need to look at this threedogs
2007 GU 6 /ST-L / MYO8 / DIESEL/AUTO /MOONSTONE /pro vent 200
OH LEATHER IS NICE
Pooter love it
------------
2008 GU 3.0 CRD Auto - Life's too short to eat bad food.
I see your problem..................there are 2 different types of bolts, 1 is a bolt the other is a setscrew *LMAO*
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
May be you need a hammer for this install? lol
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Fixes most things does it not???
nah its the thread wont go through
die must be warn for the hole
2007 GU 6 /ST-L / MYO8 / DIESEL/AUTO /MOONSTONE /pro vent 200
OH LEATHER IS NICE
I had the same issue. Not sure if Nissan changed things but the holes in the plates are 13mm, the blind nuts, and therefore the bolts into the chassis, are 14mm.
Took mine to a local engineering shop and he milled the holes out for me, then I just sprayed a bit of paint on and all good.
PS. The engineer was VERY impressed with 3D's plates.
threedogs (21st November 2012)
You may have one of the older ones theses fit about 6 different 4x4. just so the opposition that copies them I wont name them. They have since had 14.5 holes laser cut. just use a die grinder to take a piece of material out. try coming up with one product that fits 6 plus 4x4, sorry for inconvience. Also trying to cool down. Will double check with laser cutter in the morning
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Posting Permissions
Reply With Quote