my plug seems to be different than anybody else s . On all posts that i've seen you put a wire between wire 1 & 8 to read the faults. My plug doesn't have a wire on position 8. there are 5 on the bottom left side & 2 on the top row. It is a patrol 10/07 3.0LTR xd30 turbo diesel. how do i test for faults?
Think Yendor may be your man here, they changed the plug but cant recall what year
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Your Patrol should be a CRD, the best thing would be to purchase a ScanGauge.
This will enable you to check for fault codes and heaps of other stuff.
x 2 with Rodney, purchase a ScanGauge, a lot easier than trying to manual fault findOriginally Posted by Yendor
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
my ultragauge came on the mail on friday. I presume it is a similar thing to the scangauge.
Let us know how it goes and post up any pics of the gauges and list what gauges you can use.
Cheers
Toddie
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Posting Permissions
Reply With Quote