Sand flags

[DX grunt]

Why are sand flag/pole set ups for bullbars so expensive????

How can they justify charging those prices??????

There's nothing to them !!!!!

[the ferret]

It's like a lot of things that you need, it's only the profit that makes it expensive!!!

[jace75]

I used a bike flag i still have it.
it has a fiberglass rod and yellow flag.

[DX grunt]

Brilliant idea. Thanks Jase.

I could stick one (or two) on the front of my pod and that will leave enough room on my bullbar for a Bundy and Aussie flags
and that would make my ute a Beaut Ute ( lol - personal joke between me and Todd)

[MudRunnerTD]

Hey Ross,

Last outback trip i used a fishing rod duct taped to the bull bar and a RED rag cable tied to the top mate. Check out page 9 of the GQ build thread i did. The bonus is that if you intend to do a bit of fishing when you get there well you know you did not forget your pole ;-)

Alternatively to the Red Rag >>>>> A few years ago i was doing a big trip into the dunes around Robe in SA and got my mum to Cut Up a HiViz vest that was no longer used that had the HiGlo tape on it and everything, Mum sewed her little heart out and made me a Wicked flag with a glo cross in the middle and everything, glo around the out side and Red / Yellow. Looked great. I leant it to a friend and they taxed it.

Still used a Surf rod that time.

[DX grunt]

Hey Ross,

Last outback trip i used a fishing rod duct taped to the bull bar and a RED rag cable tied to the top mate. Check out page 9 of the GQ build thread i did. The bonus is that if you intend to do a bit of fishing when you get there well you know you did not forget your pole ;-)

Alternatively to the Red Rag >>>>> A few years ago i was doing a big trip into the dunes around Robe in SA and got my mum to Cut Up a HiViz vest that was no longer used that had the HiGlo tape on it and everything, Mum sewed her little heart out and made me a Wicked flag with a glo cross in the middle and everything, glo around the out side and Red / Yellow. Looked great. I leant it to a friend and they taxed it.

Still used a Surf rod that time.

Another cheaper option. Thanks MR.

I'll only be able to use half my surf fishing rod because my height will exceed the max of 4.3m high in WA. lol

Cops are pretty strict on empty fishing rod holders on the front of bull bars, too. I know of people that have copped a yellow sticker for it.

Another option I just thought of was those red/yellow oversize flags they stick on oversize loads on trucks. Seen them close up and they look pretty robust and won't disintergrate too easily.

EDIT: Your pic was why I initially asked the question. Didn't realize your 'sand flag' was a fishing rod under all that 'mud'. lol

Thanks for the ideas.

Silly me went to the introductions section and had to sift through the 31 pages of intro's. Then I realized you were in the member's ride section. Doh!

[the evil twin]

Why are sand flag/pole set ups for bullbars so expensive????

How can they justify charging those prices??????

There's nothing to them !!!!!

Because they are mandatory on mine sites... ergo... they are cost plus 1500% mark up.

I might have an old 27 meg fibreglass whip antenna at home that would be free to any WPC members who live North of Wagin and owns a Wagon... hehehehe... Nah jokin, you can have that if you want... tie an old pair of your boxers to the top of that and I reckon noone would every come near you...

[Dhuck]

the evil twin had this to say:

might have an old 27 meg fibreglass whip antenna at home

Even buying a whip antenna and flag would work out cheaper than a full flag setup. I think near on every 4b owner has an old aerial lying around.

[DX grunt]

Because they are mandatory on mine sites... ergo... they are cost plus 1500% mark up.

I might have an old 27 meg fibreglass whip antenna at home that would be free to any WPC members who live North of Wagin and owns a Wagon... hehehehe... Nah jokin, you can have that if you want... tie an old pair of your boxers to the top of that and I reckon noone would every come near you...

OK thanks. If you're offering it to me, I'll have it. If it's for somebody else we both know, they can have it. lol

[the evil twin]

OK thanks. If you're offering it to me, I'll have it. If it's for somebody else we both know, they can have it. lol

... it's yours... the other bloke pulled outa the deal when he realised it included a pair of your old boxers as well.

The 27 meg Antennas have a 1/2" thread on the base from memory... anyway a wingnut from the hardware shop or a nut welded to the B Bar and you can take them on or off to suit if you have a flange to mount it.