Random I know, but need heater hoses for my L28 MQ. Went into RIPCO and all they have listed is the radiator hoses.
Hoses I need part numbers etc for are the ones in the photos
those two that attach to the heater inlet/outlet
and the two that sort of run along the length of the motor.
Any help or tips would be awesome
Bryan
Whoever disagrees with the saying "Might is right" obviously doesn't own a MQ
Good tip put ya self outa ya misery and buy the best of the trolls......the one n only mighty GQ hahahahahhahaha
Tapp tillya Crap
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Unfortunately growler I'm unable to own a GQ as I'm not one that is in touch with his feminine side HAHAHAHHAA
Whoever disagrees with the saying "Might is right" obviously doesn't own a MQ
Maxhead (11th June 2012)
I said GQ not GUrly hahahahahhaha hahahahahhaha
Tapp tillya Crap
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
aussiemale (11th June 2012)
Go to mackay radiator hose website
No there not in mackay (qld) but an aussie company, if its not on their website send em an email, they mite help ya or have an agent in nu zeelund
Will chase it up,
Went to Nissan NZ
for two hoses that connect to the heater (Nissan Part number 92400-C6406, 92410-C6406)
AND two replacement metal tubes from the heater (Nissan Part number 92416-C6001, 92406-C6001)
ONLY $304.00 and I'd have to put down a 50% deposit as it would be ex-japan and he couldn't guarantee that he could get the parts..told him he was dreaming
Whoever disagrees with the saying "Might is right" obviously doesn't own a MQ
The steel heater hoses that corrode,in the above pic, im sure a steel heater hose from another MQ/MK heater box will swap over
$300 for those hoses,thats nissan for ya,they wanted $900 odd for a genuine radiator for the GQ .....
Well I'm glad I'm not the only one they want to take advantage of, I just reckon they should at least PAY for a room if that want to do that sort of thing to me LOL.Originally Posted by MQ MAD
Whoever disagrees with the saying "Might is right" obviously doesn't own a MQ
Im pretty sure I just used heater hose for both of these.
There are no tight bends - just get extra hose to ensure all your bends are gentle
1991 GQ LWB 4.2 Carby dual fuel, 32 mud claws, 2 inch lift, LSD's front and back
And its Toooooooo High for the Ball & chain
aussiemale (13th June 2012)
Well, that'd be a damn sight cheaper if that's the case LOL
Whoever disagrees with the saying "Might is right" obviously doesn't own a MQ
Posting Permissions
Reply With Quote
