Swapped injector pump over and alternator.
Washed all the mud out of the radiator and condensor from the last effort.
Going to have a go at putting a seal kit through the injector pump myself now i have a spare one.
Swapped injector pump over and alternator.
Washed all the mud out of the radiator and condensor from the last effort.
Going to have a go at putting a seal kit through the injector pump myself now i have a spare one.
Installed an Ironman 2" lift into my troll with a basic set of spanners and a highlift jack... by 10 oclock, I would have made your 90 yr old Nanna smile (multiple times... if you catch my drift) for a decent 17mm & 19mm ratchet spanner and a breaker bar with sockets.
growler2058 (25th April 2012)
headed out with the SEQ boys to glass house mountians and tried my hand at panel work with rocks did really well with standard ride height and tyres just one bent side step but that straightned with me jumping on it.
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of themselves without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honour.
Being 3,000k away, I missed my Patrol, today. lol
Winner of 'Best 4 x 4 ' at the 2017 Albany Agricultural Society Inc - Town n Country Ute Muster.
Ex Telstra - 2005, 4.2 TDi ute -with pod and more fruit than a grocery shop.
Installed a new turbo timer!
gave it a vacuum
Put the aux battery tray in ... And then the battery.
------------
2008 GU 3.0 CRD Auto - Life's too short to eat bad food.
Put mine out in the rain to get its annual wash.....
Taps a lot!!!!!!
gq_simon (16th August 2013)
Plumbed in my boost gauge.
E Locker, swivel kits, spindles, front brakes, extend front brake hose, rear slave cylinder, engine belts, fixed manifold leaks (10.7psi boost on the guage), torsion bar bushes, steering limits on front diff - havn't got the bill yet?????
Shes nice and tight up front now.
Reply With Quote
