What did you do to your Patrol today!

[dan&tamspatrol]

fitted snorkel and changed road tyres to 35s ready for wednesday

[growler2058]

fitted snorkel and changed road tyres for 35s ready for wednesday

Sounds nice got some foters for us;-)


Tappin N Crappin

[pjwooly]

Well all in the space of only a few hours...i realigned my bullbar cos it was a wit wonky,took off the lower fan belt "keeper" cos it was a squeelin' , and drained my powersteer fluid a couple of times cos i had mistakenly put a few mills of brake fluid in there.

All in all very happy with myself.Had to try and get it done while my 2yr old was asleep,cos once he's up you get nothing done.

Cheers

[NissanGQ4.2]

Absolutely nothing....... moved it out of the garage into the sunshine so it could get some skin cancer while I split some fire wood

[dan&tamspatrol]

Sounds nice got some foters for us;-)


Tappin N Crappin

just put up pics they are in ( our rig ) shud be on the whats new page now

Edit: can be found here: http://www.nissanpatrol.com.au/forum...-Introductions

[HammerBuilder]

Well all in the space of only a few hours...i realigned my bullbar cos it was a wit wonky,took off the lower fan belt "keeper" cos it was a squeelin' , and drained my powersteer fluid a couple of times cos i had mistakenly put a few mills of brake fluid in there.

All in all very happy with myself.Had to try and get it done while my 2yr old was asleep,cos once he's up you get nothing done.

Cheers

No worries about a coupla mills of brake fluid as all the ol' mechanics I know also add a table spoon into their engine oil as they say it keeps the seals n O rings from drying n cracking so no oil leaks, beats me but now I do the same & so far been a few years n no leaks. I am not saying you should.

[HammerBuilder]

Well today started at 6am
first picked up tilt tray went to first job n picked up a Hyundai Escavator n took it to its destination
next picked up a franner nut harvester n took it to next farm
finally got home popped my bonnet on GQ done a visual then unbolted overflow bottle flushed it out n now I can see the coolant level.
Next got my ARB twin compressor out of back of shed n bolted it in under my back seat Drivers side (Pics will show)
then ran the wires n mounted switch in center consol
then ran High Pressure 10mm inside diameter hose up through n over inside rear wheel arch under plastic surrowd
kicked compressor in the guts n damn I had a winner lights on switch & all worked like it was meant to be..

Tomorrow gotta drill threw rear step n mount Hose connector out back under spare tyre in corner out of the way...

Next week full steam ahead with Wiring n fittout of Black patrol hammer its got a V8 turbo Bunswick Diesel in it with many many extras to sort out also the rear cargo area has a full sheet metal canopy which is only in primer atm lots to do n as usual they wanted it done yesterday lol no chance with heaps of electricals n gadgets with no wiring diagrams or conector plugs yippee what a nightmare lol

[DX grunt]

I scrubbed the bug guts off the bull bar and nearly detailed the rest! lol

[Clunk]

I just left mine in its natural state.................... dirty!!!!!! hahahahaha

[dan&tamspatrol]

mounted reverse camera and put all the trims back together from installing it and reattached a bit of plastic that snapped off the radiator