Bellies 2000 3.0L ST

[Sir Roofy]

Thanks Smokey. Yeah up at lithgow the week after i brought it. took it for a little shake down run.
Whats NADS are you talking about?? It has the exaust gas recirc. blocked off, boost and exaust temp gague, turbo has been wound back abit. I think the only thing it is missing is a oil catch can.
Is there anything im missin?

dawes and needle valve to control boost

[Bellie81]

Would i need that if the turbo has been wound back?? I havent seen it boost ove 18PSI since i have owned it

[nissannewby]

I could be wrong but it sounds as if it may already have it. Take a photo of your engine bay and the zd guys will be able to tell you preferably around the turbo area.

[Oversize]

We all need something to pamper. Nice rig Bellie

[Bellie81]

I could be wrong but it sounds as if it may already have it. Take a photo of your engine bay and the zd guys will be able to tell you preferably around the turbo area.

Thanks. I will do that when I get a chance (maybe over the weekend) and ask the guys on here.

[Bellie81]

We all need something to pamper. Nice rig Bellie

We sure do. I have already brought the rubber mats to protect the carpet

[Oversize]

We sure do. I have already brought the rubber mats to protect the carpet

I have taken the rear carpet out and replaced it with a decent piece of fitted rubber matting and seriously want to take the front lot out. Thelma has the rubber mats but I hate the thought of cleaning carpet after playing in the mud and dust on my next trip to the Cape. I will wait a bit and see how they hold up.

[Bellie81]

Ok I have a few pics of my engine bay around the turbo area and was aondering if somebody can tell me if I have a Dawes and needle Valve.

pics attached

[Bellie81]

Im just wondering if anybady can tell me if my truck has a dawes valve. There are a few pics of my engine bay above, mainly around the turbo area.

Thanks

[nissannewby]

The first is prob the best for it I'm not much of a know how on the humble 3L but she looks to be standard and doesnt look to have the valve set up on it. Im sure some of the 3L experts will be around soon with there input.