Mounting Hilift Jack

[taslucas]

I found this site: http://www.hi-lift.com/accessories/index.html
Its got some handy Hi Lift accesories

[Clunk]

Nice find Lucas and congrats on the 1000 posts of waffle mate!!!!!! Hahahahaha

[taslucas]

Nice find Lucas and congrats on the 1000 posts of waffle mate!!!!!! Hahahahaha

Thanks mate, I got to 1000 without getting bitten!!

[wildgu6]

Handy little link Tas, Cheers for that mate.
Be a good one to post in useful websites library. Have a good day buddy

[Dirtydog16]

You could try the old army land rover style and bolt it to your bonnet and while you are there, whack on an axe and a pick and you will be set!

[taslucas]

You could try the old army land rover style and bolt it to your bonnet and while you are there, whack on an axe and a pick and you will be set!

The damn bonnets are heavy enough already!! lol but thanks for more ideas..

[oncedisturbed]

You could try the old army land rover style and bolt it to your bonnet and while you are there, whack on an axe and a pick and you will be set!

I don't think it legal for them to go on these unless the vehicles came with that option

another option is look the quik fist clamps that the firies use, had some on my BT50 for the shovel and they worked a treat and you can get them in various sizes and most 4wd accessory shops are stocking them
http://www.firetrader.com.au/category2_1.htm

[taslucas]

I don't think it legal for them to go on these unless the vehicles came with that option

another option is look the quik fist clamps that the firies use, had some on my BT50 for the shovel and they worked a treat and you can get them in various sizes and most 4wd accessory shops are stocking them
http://www.firetrader.com.au/category2_1.htm

Thanks mate, nice link. You could use those things for anything and everywhere.

[oncedisturbed]

yup, will be getting some more once I get the troll back from ARB when I return from Bali and will be mounting gear on the safety barrier with them, fire extiguisher, axe etc

[Johan Safari]

Had mine mounted mine under the bonnet against the firewall across the engine with a few brackets. Always clean, safe and out of the way. Only problem was that on a hot day you needed gloves to remove it. Will see if I can find any pics if anybody interested.