Phil's NADS

[philws]

G'day peeps,

Have just started the NADS adventure, got my catch can on over the weekend (ProVent 200). Bloody pain in the arse to get in there though, the 25mm ID pipe that I got from pirtek is very thick and doesn't bend easily. Next will be the boost gauge, I just need to take the pipe to someone to braze on a connection then I'll fit it up myself.

[Sir Roofy]

And now to the next step good pics mate

[snicko]

Great pics. Good luck with the rest. Keep up dating as you go along.

[teleman]

Great stuff phill. Keep us posted.

[T0nka]

Sorry phil but i had to laugh at the thread title

[philws]

just a quick question before I get the boost gauge on.
Is this the right spot for the bung (arrow and circle in pic)?

Cheers

Phil

[boots]

I reckon there would be fine . most guys put them just on the outlet pipe of the intercooler or the pipe between the two hoses on the outlet,
the one under your pcv hose. from that photo youve shown , looks like your intercooler is leaking too . bottom right - the reason I mention it
is mine done the same , same spot . nice oil residue and dirt / dust . jmo .

[philws]

Thanks for the pickup boots, I will have to investigate further. I assume that where I put the probe for the gauge i.e. pre or post intercooler will change the reading I get. I want to put it in the most common place so that I can compare readings with other people?

Cheers

Phil

[snicko]

Hi Phil

This is where my mechanic put ours

Hope this helps

[boots]

Here is some happy snaps I found on this site . Hope I dont offend anyone by using them and hope it helps you philws .