OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 36

Thread: Using an old tray after pod fitting

Threaded View

  1. #7
    Enjoying the trips macca's Avatar
    Join Date
    Oct 2010
    Location
    Old Bar, NSW
    Posts
    3,051
    Thanks
    1,640
    Thanked 1,917 Times in 1,080 Posts
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    The suspension is an independant system from Smooth Ryders which is now called Cruisemaster. Rated at 1200Kg with Gabriel Shocks.
    If it is not able to support the wieght, the front spring set from MacTrol are ready to go in, They are rated at 1560Kg I think which will be plenty.
    Had some top end Koni's in the back of my Lux that were a few years old when we were heading to the Anne Beadell last year, got nervous and put new shocks all round so these are plenty good enough for the trailer and will be used.

    Figured if I want to sell the ute I can put the tray back on it and the pod will go on the trailer, sort of camper trailer I guess.

    Yes mate I am a sparky, the plan is to put all our mains cables (3 heavy rolls) on permanent racks and connection equipment on the tray or in the allum box. Then when we have a Level II job all the gear is in one place.
    Will try and find a hydraulic hoist to lift the drums from the ground to the racks saving our backs.

    Keep you all posted.

    Macca
    Attached Files Attached Files
    Last edited by macca; 11th September 2011 at 12:28 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •