Hello,
The GU had a broken mirror when I purchased it. It was an easy fix and I thought I'd share.
The mirrors fitted are the Clearview Original towing mirror. The lower section of the left side was broken (part name: Clearview Original left side Convex Mirror Kit).
The Clearview website has a full range of spare parts (and even a section for pre-owned items) and I picked up the kit for about $45 delivered to Tas.
https://www.clearviewaccessories.com...owing-mirrors/
Easy to use site with fast shipping. It did not come with instructions but is dead simple to do.
The kit:
DSC_5195.JPG
Flick out the middle section of mirror to reveal the screw and undo.
DSC_5194.JPG
A bit rusty and yuck in there. I hit it with some rust converter and lubed up the slides.
DSC_5196.JPG
A single screw to put the new parts back in. Adjust screw so that the baseplate can move but is not loose. (you can't adjust screw once the mirror
goes on)
DSC_5197.JPG
Peel the back off the double-sided tape and stick the new convex mirror in place. Just like new!
DSC_5200.JPG
Reply With Quote