Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Hi,New on this forum.
Having a huge issue with my daughters GU Patrol ute,2012 Y61,with ZD30(DDTi)engine.Throttle stuck on full noise!!.
I am looking for test procedure for the throttle pedal sensor.Testing with Snap on scan tool shows following P020,,P2135 and P0120
P020 Accel pedal position sensor2 circuit
P2135 Accel pedal position 1 and 2 signal correlation
P0120 Accel pedal position sensor 1 circuit
When I ran the snap on scan tool tps test it showed values from 4.2v to 4.9v but nothing below that,I'm assuming its a 0to5v tps and the high reading at closed throttle of 4.2v is the reason on start up it goes to full noise.
I cant access the workshop manuals but the correct test procedure is what i need.
Also i have seen on net patrol a part sell complete throttle pedal that looks identical to what i have but it says not suitable for ddi engine can anyone confirm please.
Reply With Quote