What wire to use for td42 fuel cut solenoid after swap from tb42 efi.
Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
What wire to use for td42 fuel cut solenoid after swap from tb42 efi.
Hey all,
I hot wired my td42 fuel cut but cant find a suitable wire to use from the tb42e loom. I have found some wires that are supposedly hot in 'on' and 'start' but they dont seem to be enought grunt to switch the solenoid. Any advice from people who may have done this swap?
Reply With Quote