Quote Originally Posted by PeeBee View Post
Thanks Guys, the VASS engineer is going to sign off on the 1" body lift. I could do the scoop as long at its not higher than 80mm above the bonnet. Speaking with Brunswick Diesels again this morning they simply cannot give any guidance as to where specifically the clash points are - story keeps changing, vague, but they know the body lift fixes everything with the clearance so i am backed into a corner. I have started on removal of the body lift bolts, both sides done except pass side rear corner that appears to be spinning a nut in its retainer, and the two fronts remain for tomorrow to remove then start the reassembly.
A piece of 25mm square tube down that hole will hold that nut from memory.