I know there is alot of other posts about the egr plate but i couldnt find one to help me.
Ive seen on other posts about there being 2 bolts to loosen and then slide the plate down etc


Haynes booklet shows it as 2 bolts

Now the problem ive got is that there is 3 bolts (see attached pictured)
And upon loosening them off there was no movement on the housing therefore i was unable to slide the plate into place.
I gave it a few gentle taps with a persuasion bar but there was no persuading it to budge. Im guessing that just the constant heat over the years has made it tougher to move.


Am i doing something wrong?

Any tips or advice would be greatly appreciated.

CHEERS IN ADVANCE



Sent from my SM-G930F using Tapatalk