so time to bolt the cab down firm, new bolts of course and nice big washers. the rear two had done what they all do and split the nuts out of their captive housings and the factory hole isn't big enough to fit a decent sized washer through so i ran a hole saw through and made them the same size as the others in the floor, i'll just put a grommet in to cover them up and they will look like that's how they were meant to be
IMG_0734.JPG IMG_0735.JPG
pulled the roof lining out
IMG_0740.JPG IMG_0741.JPG IMG_0742.JPG
and the factory insulation, no sign of rust at allno wonder these things rust so often though there is bugger all paint under the roof lining, pretty much just thin primer.
IMG_0743.JPG IMG_0744.JPG
splashed the first coat of paint on, couple more coats on the roof and a few on the floor and I can start to put the insulation in.
IMG_0751.JPG IMG_0752.JPG
Reply With Quote