i got the coil brace brackets folded and grabbed some more steel to make the last 3 brackets
IMG_0319.JPG
the tacked the passenger side engine mount on
IMG_0318.JPG
made the plate to bolt to the engine, i made sure i had a cutout for the oil feed for down the track when i turbo it, i haven't seen any of the aftermarket ones where they have this. and i made the connecting pieces using the same cardboard template method
IMG_0322.JPG
tacked the side plates into position
IMG_0323.JPG
pulled it all out and welded it up on the bench
IMG_0324.JPG
i added a gusset in welded them all up and blasted them with some satin black killrust enamel but it got a bit dark, i'll throw up a finished off and installed photo tomorrow, i got everything cut out for the driver side, just have to chamfer off the corners and stick it together, that's another job for tomorrow
Reply With Quote