Ive got a situation where I had an autoelec mate do some wiring for my dual battery down to the rear of my car, but I never had a T piece or other to run power under the dash at the front of my car so I can add those additional 12v things that keep coming along, his advice was if ya dont need it now dont put one in, so now as I expected I need a distribution panel set up in the front of my GU to add 3 things to. The panels are made by plenty and many options but thats not my problem.

The problem is when he later installed a uhf he tagged into the 6B&S under the floor trim panel directly below the passenger door, the step panel ill call it

My question is this, Is there a T peice available to run a 6B&S splittter so to speak from this section to under the dash to a distribution panel.

Or do I need to solder it and tape it up, Ive looked around and found some things that are similar but not suitable for my application.

Ive been to Jaycar and they have nothing, the closest Ive found is at Supercrap with 1 x 6B&S in to 3 x distribution outs but not a 6B&S out.

Just trying to keep it all clean, but feel that may have already been abused by tagging it in the first place.

Interested to hear your thoughts.

Cheers
Smooth