Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
You can do it in a lathe, use a torch and do it by eye or the best method is to make a bar that goes all the through the housing inc the centre and uses bushes/discs that slide onto said bar and into the axle seal area. Now if its straight they go straight into the seal are if not its clearly visible which way it needs to go.
Last edited by nissannewby; 10th April 2015 at 06:53 PM.
Reply With Quote
