Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Been a while since I make these, but have always mean to put up a few photos. Haven't got any photos of the build, but Kallens build thread was very useful and also checked out the Full Boar Fouby Drawers for a bit of inspiration. Made it all out of 12mm marine ply (3 sheets) painted it matt black and covered it with Bunnings auto carpet.
Used the UES Slides with one lockout and one without per side. Found these to work really well and are easy to install. To mount them you need to pull them apart by pressing in the lockout tab and pulling them out then you can get to all the screw holes.
Make a couple of little hidey holes on each side. You can still get to the jack easily enough, I also mounted the jack handle and wheel brace so it's all together.
I finished the drawers at the top of the bit which drops down (the old footwell for the dickie seats), and put a cover over it, so there is a fair bit of room for stuff you don't need to access often. I also went a full length cargo barrier so you can stuff things in here also without too many dramas.
Made a table out of the leftovers, which is bloody handy. Covered the speaker holes and carpeted the doors. i mounted some 6" speakers in the rear doors with 20mm spacers, which is heaps better seeing as when the rear is loaded up with gear the speakers in the barn doors are pretty much useless anyway.
Reply With Quote